Field Inspection Testing Kit - Metode pengujian lapangan kekuatan geser baling tanah

Model : 16-T0174/A

Brand/Supplied From : Controls – Italy

Standards : ASTM D2573(padanan SNI 03-2487-1991)

ASTM D2573 : 1.1 This test method covers the field vane test in saturated clay and silt soils for determination of undrained shear strength. Knowledge of the nature of the soil in which each vane test is to be made is necessary for assessment of the applicability and interpretation of the test. The test is not applicable for sandy soils which may allow drainage during the test.

 

Description

Ideal for geotechnicians, geologists and agronomists. It consists of the 16-T0163 Pocket penetrometer and of the 16-T0174 Field inspection pocket vane tester.

• 16-T0163 Heavy duty model, all stainless steel construction, three interchangeable tips:

4.5 mm dia. for very hard soil,
6.35 mm for medium and soft soil,
8.98 mm for soft soil. Supplied complete with plastic case.

• 16-T0174 for field surface and deeper measures.

Especially designed to mesure the undrained shear strenght (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected strenght of the soil. The height/diameter ratio of all vanes is 2. During operation the vane is driven for 5-6 cm into the soil and then turned with the handle. Deep measures (i.e. on the top of undisturbed samples) can be obtained using the extension rod ( see accessories).

The two units are contained in a practical carrying case.
-Case dimensions: 240x210x50 mm
-Weight approx.: 1.8 kg

 

 

 

Informasi Produk : Yudhistira, ST

Hp. 0811 188 6845; 0818 0816 0634 (WA)

Email : naysite2@gmail.com

Digital Hot Plates

Merk/Di suplai dari : Controls – Italy

Kode Barang : 10-D1401/E

GENERAL DESCRIPTION

Designed to meet laboratory daily heating requirements. Digital temperature controller and aluminium heating surface.

 

Main Features

• Large heating surface. Fast and uniform heating.
• Microprocessor chip for precise temperature control
• Constant heating and no electromagnetic interference
• Special high resistant coatings prevent corrosion and guarantee long life
• Compact design combined with an elegant look

 

Technical Specifications

D1401/E, digital temperature controller and aluminium heating surface.

• Temperature range: ambient to 350°C
• Temperature stability: ±5°C
• Heating area: 300x400 mm
• Heating power: 2000 W
• Dimensions: 400x300x150 mm
• Weight approx.: 18 kg

And D1401/F with glass ceramic plate and LED display.

•  
• Temperature range: ambient to 580°C
• Temperature stability: ±5°C
• Heating area: 184x184 mm
• Heating power: 1010 W
• Dimensions: 215x360x112 mm
• Weight approx.: 5 kg

 

Kode Barang

10-D1401/E Rectangular hot plate 300 x 400mm with digital display. 2000W 230V/50-60Hz/1ph

10-D1401/F Digital hot plate, 184x184 mm, with glass ceramic plate and LED display. Maximum temperature 580°C 200-240 V, 50-60 Hz, 1 ph

10-D1401/G Rectangular hot plate 140 x 140mm with digital display. 500W. Maximum temperature 350°C. 200-240V/50-60Hz/1ph

 

Info/Price :  Yudhistira

Hp. 0811 188 6845; 0818 0816 0634

Email : naysite2@gmail.com

 

Pull Off Tester 58–C0215

Merek/Supplied From : Controls – Italy

Kode Barang : 58–C0215

Standard : EN 1015-12, EN 1348, EN 1542, EN 13963, EN 14496, ISO 13007-2, ISO 4624, ASTM D4541, ASTM C1583, ASTM D7522, ASTM D7234, EN 12004-2

 

ASTM C 1583 – 04 : Use to determine one or more of the following:

1.1.1 The near-surface tensile strength of the substrate as an indicator of the adequacy of surface preparation before application of a repair or overlay material.

1.1.2 The bond strength of a repair or an overlay material to the substrate.

1.1.3 The tensile strength of a repair or overlay material, or an adhesive used in repairs, after the material has been applied to a surface.

Fitur Utama :

• Peralatan Portabel yang mudah dibawa dan digunakan dimanapun
• Menggunakan Display dengan resolusi tinggi
• Indikasi Grafik dari pembebanan
• Terdapatr Port serial untuk koneksi ke PC
• Beroprasi dengan baterai dan disuplai dengan carger
• Indicator of ram position allowing an estimation of the brittle properties of the test sample
• Disuplai dengan sertifikat kalibrasi

 

General Descriptions :

Peralatan ini digunakan untuk mencari nilai kuat rekat antara perekat seperti semen, beton, dll

Aparatus pada dasarnya adalah sebuah dynamometer yang dilengkapi dengan sel beban dan unit display digital resolusi tinggi. Gaya tarik langsungnya diaplikasikan dengan memutar roda tangan. Kapasitas 16 kN dan resolusi tinggi memastikan rentang ideal kerja yang luas untuk sejumlah besar bahan dan aplikasi.
Ini dilengkapi lengkap dengan: cakram uji aluminium 20 dan 50 mm dia., Baut sekrup, sertifikat kalibrasi yang dapat dilacak dan tas jinjing.
Beragam aksesoris, seperti senyawa perekat, cakram dengan berbagai bentuk dan dimensi, juga tersedia bor.

 

Spesifkasi :

• Kapasitas Beban: 16 kN
• Unit Pembaca beban menggunakan: Load cell
• Resolusi: 1 N
• Range pembebanan: 0.25 to 16 kN
• Akurasi : kurang dari 1%
• Batterai: 9 V
• Dimensi: 340x240x250 mm approx.
• Berat (tester only): 3.3 kg
• Berat (with carrying case): 5 kg

 

Info kode Barang :

58-C0215
Pull-Off/Bond strength digital tester. 16 kN cap. Battery operated. Complete with AC adapter 110-240V, 50-60 Hz, 1F

 

Kategori : Alat Uji Semen, alat uji kekerasan beton

Info/Price:  Yudhistira

HP/WA : 0818 0816 0634; 0811 1886845

Email : naysite2@gmail.com

 

 

 

 

Pullout test apparatus

Brand : Controls – Italia

Kode Barang : 58-C0178 

Standard : ASTM C900,

ASTM C900 : 1.1 This test method covers determination of the pullout strength of hardened concrete by measuring the force required to pull an embedded metal insert and the attached concrete fragment from a concrete test specimen or structure. The insert is either cast into the fresh concrete or installed in hardened concrete.

 

Description :

Used for determining the pullout strength of hardened concrete in test specimens or structures by measuring the force required to pull an embedded metal insert and the attached concrete fragment from a concrete mass.

The pullout test apparatus 58-C0178 is used for pre-embedded inserts in fresh concrete mass. It comprises a hydraulic jack 100 kN cap., a precision measuring Bourdon gauge 150 mm dia., bearing ring and 10 pullout inserts, all contained in a carrying case.
Case dimensions: 740x300x255 mm
Weight approx.: 21 kg

For embedded inserts after the concrete hardening, it is available the kit model 58-C0178/3, that includes a professional electrical drill with suitable power, SDS mandrel, 18mm drill bit for concrete, pack of 10 expanding plugs dia. 18mm x  80mm and manual air pump for dust cleaning. (This apparatus does not match all the requirements of the Standard UNI 10157, EN 12504-3).
Case dimensions: 520x430x390 mm
Weight approx.: 11 kg

 

 

Ordering Info :

58-C0178 Pullout  test apparatus, 100 kN cap. for pre-embedded inserts

Accessories :

58-C0178/2 Pullout inserts, 30 mm dia. Pack of 50 pieces

58-C0178/3 Set of accessories for 58-C0178 pullout apparatus adopting test inserts suitable for installation after concrete hardening

 

 

Price/ Call For Info

Yudhistira

Hp. 0811 188 6845, 0818 0816 0634 (WA)

Email : naysite2@gmail.com;

 

Alat Penggetar ayakan otomatis dengan timer - Electromechanical sieve shaker

Brand/Supplai dari : Controls – Italia

Standard : EN 932-5

Kode Barang : 15-D0410

 

Fitur Utama :

- Dengan efek ganda dalam melakukan ayakan menggunakan sistem mekanik elektrik..
- Suitable for up to 12 sieves 200/ 203 mm dia. atau 10 sieves 300/ 315 mm. dia.
- Menggunakan penjepit yang simpel, mudah digunakan dan cepat.
- Menggunakan timer.

 

Gambaran Umum :

Mesin ayak elektro-mekanis baru ini memiliki pengayak yang sangat efisien, Dengan desain yang sederhana namun sangat tangguh. Kolom saringan dipegang di bagian atas oleh bantalan karet dengan kursi berbentuk bola dan berputar secara eksentrik di bagian bawah memastikan serutan seragam sampel di seluruh permukaan saringan. Pada setiap putaran revolusi, mekanisme mekanis sederhana menanamkan hit pada dasar kolom saringan sehingga memindahkan sampel ke permukaan saringan untuk tindakan pengayakan yang sangat efisien. Panel depan termasuk sakelar utama, tombol dan timer berhenti darurat.

 

Spesifikasi :
- Kapasitas: sampai dengan 12 sieves dia. 200/ 203mm, dan 10 sieves dia. 300/ 315 mm
- Range waktu penggunaan : 0-30 min.
- Power: 180 W
- 230 V, 50 Hz, 1 Ph
- Dimensi ( l x d x h) : 660 x 500 x 1510 mm
- Berat : 65 kg approx.

 

Ordering Info :

15-D0410 Electromechanical sieve shaker for sieves up to 315 mm dia. 230 V, 50 Hz, 1 ph.

15-D0410/A Electromechanical sieve shaker for sieves up to 450 mm dia. 220 V, 50 Hz, 1 ph

33-T3000/CB Noise reduction cabinet for CBR-Proctor compactor model 33-T351x, 33-T361x and sieve shaker model 15-D0410.

 

Kategori : Alat Laboratorium

Price/Info : Yudhistira

Hp/WA : 0818 0816 0634; 0811 188 6845

 

UTM Automatic 500/1000kN Testing Machines for Steel and Concrete

 

Standard : ASTM A370, EN ISO 15630-1, EN ISO 6892, EN ISO 7500-1

Brand/Supplied From : Controls – Italia

Kode Barang : 70-S12A02

 

Fitur Utama :

• ·        Fully automatic test cycle with closed-loop digital feedback
• ·        High precision displacement transducer included, for automatic control of the test and plot of stress/elongation graph, based on the crossheads separation measurement
• ·        No need to use external extensometer to control the test
• ·        Best quality/price ratio
• ·        Heavy duty high-functionality jaws rated for severe prolonged use for testing up to 26 mm dia. rebars
• ·        For tensile tests up to 500 kN on steel and compression tests up to 1000kN on concrete
• ·        Double stage hydraulic pump with rapid approach and precise oil flow control
• ·        Adopts the latest ES technology for reduction of power consumption
• ·        Data acquisition and test results elaboration to EN ISO 7500-1, EN ISO 6892-1 (method B) and EN 15630-1 by intuitive and very comprehensive software (included)
• ·        Available with stand alone control console or in the integrated Compact-Line version

Spesifikasi :

 

Frame

• ·        Load capacity in tension: 500 kN
• ·        Load capacity in compression: 1000 kN
• ·        Tensile jaws including: 4 wedge grips for flats up to 13 mm thickness, 4  wedge grips for rounds up to 26 mm dia. and 2 sets of grips’ liners 4 and 8 mm thick.
• ·        Heavy duty high-functionality jaws rated for severe prolonged use
• ·        Maximum distance between grips (tensile mode): approx. 300 mm
• ·        Specimen length (tensile mode): approx. 500 mm
• ·        Max vertical clearance for compression (with 70-S0012/1): 695mm
• ·        Max. ram travel: 150 mm
• ·        Distance between columns: 310 mm
• ·        Overall dimensions approx (w x d x h).: 1000 x 700 x 1750 mm
• ·        Weight approx.: 550 kg

 

 

Price/Info : Yudhistira, ST

Hp. 0811 188 6845; 0818 0816 0634(WA)

Email : naysite2@gmail.com

Rock shear box apparatus - Mesin Uji Geser Langsung (Rock Direct Shear test)

Brand/Supplied From : Controls – Italy

Kode Barang : 45-D0548/D

Standard : ASTM D5607

ASTM D5607 : 1.1 This test method establishes requirements and laboratory procedures for performing direct shear strength tests on rock specimens.

Fitur Utama Mesin :

• Shear box made in aluminium alloy

• Maximun axial and shear load capacity: 50 kN

• Reversable shear action with 48 mm stroke

• Double version available: analogic and electronic

• Data processing template available as accessory for the digital version

• 2 mould formers included in the testing configuration 

The normal loading system is complete with an adjustable low friction pressure maintainer to absorb volume changes of the specimen during the shearing action and to ensure a constant vertical stress.
It is conforming to ASTM D5607.

Two versions are available:

• Basic model. It is supplied complete with: 5 digital gauges 25x0.001 mm (4 vertical and 1 horizontal); 2 mould formers; 2 hand operated pumps for lateral and vertical load fitted with Bourdon gauges. The pump for vertical load is fitted with a pressure maintainer to assure uniform load during the test.

• Electronic model. It is supplied complete with; 5 potentiometric transducers with 25mm travel (4 vertical and 1 horizontal); 2 mould formers; 2 hand operated pumps for lateral and vertical load fitted with Bourdon gauges; 2 pressure transducers for the direct acquisition of the load values. The pump for vertical load is fitted with a pressure maintainer to assure uniform load during the test.

• Max. axial and shear load capacity (for both models): 50 kN

• Manometers range (for both models): 50 kN x 1 kN

• Displacement reading (for Basic model): 5 digital gauges 25x0.001 mm 

• Displacement reading (for Electronic model): 5 potentiometric transducers with 25mm travel 

• Max. sample dimensions: up to dia. 102 mm (for core specimens) and 115 mm x 125 mm (for prism specimens)

• Overall dimensions (loading frame only): 460x250x600 mm

• Weight approx.: 45 kg

Basic rock shear box apparatus with digital gauges to ASTM D5607
45-D0548/D Electronic rock shear box apparatus with potentiometric transducers to ASTM D5607
82-P9008 DATALOG 8, 8 channels stand alone multipurpose data logger.
110-230V / 50-60Hz / 1 Ph.      
                               
82-P9008/F DATALOG 8, 8 channels stand alone multipurpose data logger battery operated with rigid carrying case suitable for use on field.
82-P9008/ELT Set of four cables for connecting load cells, pressure transducers, strain gauges, LDT / LVDT / potentiometric type displacement transducers to  DATALOG 8 (82-P9008). Two set of cables are required.
 
82-P9008/SOF DATACOMM 2 data acquisition software and LAN cable for PC connection of DATALOG 8 (82-P9008).      

• Up to 8 datalogger (total 64 channels) can be connected to a single PC creating a modular network (LAN hub is required)                 

• Free user setting of channel groups (nr. and  type of channels)                             

• Numerical and graphical display of the readings

• Fully customizable multi-diagrams function including multi-channels plotted against the same axes and / or one channel plotted in relation to another                           

• Data export ASCII format                    

• Possibility to save and recall different calibration files allowing quick transducers swapping                                                               

Excel data sheet for Direct Shear Strength Tests of Rock according to ASTM D5607

Sample preparation
45-D0548/8 Mould former
High alumina cement
45-D0548/9 High alumina cement for the cementation of the sample in the shear box. 50 kg bag.x

General Description :

This apparatus was originally developed at Imperial college, London, by Professor E. Hoek. It is a simple and practical method of determining the strength and slope stability of rock, both in the field and in the laboratory. The apparatus consists of a shear box designed to accept samples not larger than 115x125 mm, or alternatively cores up to 102 mm dia. The shear box consists of two halves, the upper being connected to two rams for reversible shearing action and the lower connected to a ram for normal load application. The loads are recorded by Bourdon tube load gauges or by pressure transducers (in this case external datalogger is needed).

Displacement and load readings shall be acquired by suitable datalogger that has to be add as accessory. Two versions can be used to complete the testing configuration: standard model with dedicated display suitable for laboratory use or with battery operated model for on-site use. For more info please refer to Releted Products below and Accessories section.

The high alumina cement for the cementation of the sample is not included and have to be ordered separately. See Accessories

 

Price : Call For Info

Yudhistira

Hp. 0811 188 6845; 0818 0816 0634(WA)

Email : naysite2@gmail.com;

Digital rock strength index apparatus 100 kN cap

Brand : Controls – Italy

Kode Barang : 45-D0550

Standard : ASTM D5731 | ISRM

 

ASTM D5731 : 1.1 This test method covers the guidelines, requirements, and procedures for determining the point load strength index of rock. Specimens in the form of rock cores, blocks, or irregular lumps can be tested by this test method. This test method can be performed in the field or laboratory because the testing machine is portable. This is an index test and is intended to be used to classify and characterize rock.

 

Main Features :

• 100 kN capacity
• Superior functionality and usability of the equipment, since the pump is separate from the frame
• Ergonomic digital read out unit with wide graphical display and 6 keys membrane keyboard
• Effective resolution: 18 bit (1/262'000 div.)
• Load measurement accuracy: ± 1 % 
• Load resolution: 1 N
• Supplied complete with traceable calibration certificate for load measurement accuracy 
• Set of lower and upper platen with spherical seat for compression tests on small cylinders available as accessory 

 

General Descriptions :

The rock strength index apparatus consists of a high stability load frame 100 kN cap. with hydraulic loading ram actuated by a hand pump. Loading frame and manual pump are independent resulting in a superior functionality and usability of the equipment.
The unit is conforming to ASTM D5731 and ISRM suggested method and the wide testing area allows to test both rock cylinders and irregular shaped samples.
It features an ergonomic digital readout unit with graphic display battery operated and  membrane keyboard.
The compression load is measured by a in-built pressure transducer, assuring the best accuracy and resistance to the failure shocks. A ruler is assembled on the frame allowing the direct measurement of the distance D between the conical platens before and after the test.
The complete set is housed in an ergonomic carrying case with wheels.

 

Specifications :

• 100 kN capacity
• 128 x 80 pixels graphic display with 6 keys membrane keyboard
• In-built rechargeable LiPo type battey
• Effective resolution: 18 bit (1/262'000 div.)
• Load measurement accuracy: ± 1 % 
• Load resolution: 1 N
• Load measurement by pressure transducer
• Lower crossbeam position measurement by in built meter 
• Piston travel: 100 mm
• Distance between conical platens: 100 mm
• Distance between compression platens (accessory 45-D0550/D5): 102 mm
• Distance between columns: 108 mm
• Dimensions and weight of frame / hydraulic jack:
• Dimensions (l x w x h): 200x200x418 mm
• Weight: 14 kg
• Dimensions and weight of manual pump:
• Dimensions (l x w x h): 798x160x310 mm
• Weight: 8.3 kg
• Dimensions and weight of carrying case:
• Dimensions (l x w x h):  447 x 265 x 558 mm
• Weight: 7.7 kg

 

Ordering Info :

45-D0550 Digital rock strength index apparatus, 100 kN cap. conforming to ASTM D5731 and ISRM suggested method, complete with:
- Testing frame with high performances hydraulic jack and manual pump
- Load measurement by pressure transducer (traceable calibration certificate included)
- In built meter measuring the vertical clearance between the conical platens
- Supplied with rigid ergonomic carrying case with wheels
Battery charger 110-230 V, 50-60 Hz, 1 ph. Power cable included

Accessories:
45-D0550/D5  Set of lower and upper platen 52 mm dia. with spherical seat

45-D0550/D6 Mounting tool suitable for the conical points fitted on point load machine 45-D0550

58-C0215/T2 Serial cable for PC connection. Requires a PC with RS232 serial port or RS232/USB adaptor (see our model 82-Q0800/3)

Spare parts
45-D1717  Clear safety goggles

45-D0550/A7 Set of hardened conical points

45-D0550/A9 Set of spare gaskets for the hydraulic cylinder fitted in the point load tester model 45-D0550 

 

Price : Call For Info

Yudhistira

Hp. 0811 188 6845; 0818 0816 0634(WA)

Email : naysite2@gmail.com;