Horizontal Inclinometer
Brand : Slope Indicator

Application : 

Horizontal inclinometers are used to obtain high resolution profiles of settlement or heave. Typical applications include monitoring settlement and heave under storage tanks, embankments, dams, and landfills.

Advantages : 

Full Settlement Profiles: Horizontal inclinometers provide complete profiles of differential settlement that are useful to facility maintenance engineers as well as designers.

Precise Measurements: The horizontal inclinometer typically provides more accurate and repeatable readings than other settlement profiling systems.

Proven Performance: The servo-accelerometers used in Digitilt probes were designed and manufactured by Slope Indicator. They have earned a world-wide reputation for high precision, superior stability, and rugged construction.

Compatible with both 70 and 85 mm casing: The current version of the horizontal probe is smaller in diameter and is supplied with an adaptor that allows wheels to be set for 70 mm ( 2.75" casing) or 85mm ( 3.34" ) casing. Note that earlier versions work only in 85 mm ( 3.34" ) casing and cannot be adapted for use in 70 mm casing.

Low Maintenance: The horizontal inclinometer probe requires very little maintenance, since there are no hydraulic lines or pressure sources to maintain.

Digitilt Compatibility: The horizontal inclinometer probe is compatible with the control cable, indicators, and data reduction software used with the Digitilt vertical inclinometer probe.

Informasi Produk :

Yudhistira

Hp. 0811 188 6845

Email : naysite2@gmail.com;

Inclinometer
Brand : Slope Indicator - USA

Applications for vertical inclinometers include: 

- Monitoring slopes and landslides to detect zones of movement and establish whether movement is constant, accelerating, or responding to remedial measures.
- Monitoring diaphragm walls and sheet piles to check that deflections are within design limits, that struts and anchors are performing as expected, and that adjacent buildings are not affected by ground movements.
- Monitoring dams, dam abutments, and upstream slopes for movement during and after impoundment.
- Monitoring the effects of tunneling operations to ensure that adjacent structures are not damaged by ground movements.

Applications for horizontal inclinometers include: 

- Providing settlement profiles of embankments, foundations, and other structures.
- Monitoring deformation of the concrete face of a dam.

Specification : 
- Sensors Type : Digitilt accelerometer.
- Wheel base : 500 mm
- Range : ± 53Ú from vertical.
- Resolution : 0.02 mm per 500 mm interval.
- Repeatibility : ± 0.01% FS
- System accuracy : ± 6 mm per 50 accumulated
readings. Higher accuracy is easily achived using
correction routines privided in digipro data reduction
software.
- Temperature range : -20Ú C to 50Ú C ( -4Ú C to 122Ú F) 
- Size : 26 x 650 mm.

Informasi Produk :

Yudhistira

Hp. 0811 188 6845

Email : naysite2@gmail.com;

Slope Indicator - USA - Geotechnical & Structural Instrumentation

Slope Indicator instrumentation is deployed on projects worldwide to monitor tilt, displacement, pressure, and strain.


Product Content :

Inclinometers
Inclinometer Casing
Inclinometer Probe 
Horizontal Inclinometer Probe
Digitilt DataMate II Readout 
DigiPro Inclinometer Software
In-Place Inclinometer Sensors 
Horizontal In-Place Inclinometer Sensors 
Spiral Sensor 

Piezometers
Vibrating Wire Piezometer 
Multi-Level VW Piezometer 
Vented VW Pressure Transducer 
Pneumatic Piezometer 
4-20mA Titanium Pressure Transducer
Standpipe Piezometer 
Water Level Indicator 

Settlement Systems
VW Settlement Cell 
Pneumatic Settlement Cell 
Sondex System 
Magnet Extensometer 
Settlement Point with Borros-Type Anchor
Settlement Hook for Inclinometer Casing 

Extensometers
Rod Extensometer
Soil Strainmeter 

Pressure Cells
Total Pressure Cell 

Goodman Jack

Tiltmeters and Beam Sensors
EL Beam Sensors 
EL Tiltmeter
MEMS Tiltmeter 
EL Deep Water Tiltmeter
Portable Digitilt Tiltmeter 

Track Monitoring System

Convergence Systems
Bassett Convergence System 
Digital Tape Extensometer

Strain Gauges
VW Spot-Weldable Strain Gauge 
VW Arc-Weldable Strain Gauge
VW Embedment Strain Gauge

Load Cells
Center-Hole Load Cell 

Temperature
Temperature Sensors 

Crackmeters and Jointmeters
VW Crackmeter
VW 3-D Jointmeter 
VW Embedment Jointmeter

Automatic Data Acquisition
Data Acquisition Systems
M-Logger for MEMS and EL Sensors
VW Quattro Logger 
VW MiniLogger 
Atlas Web-Based Monitoring Software 

Portable Readouts
VW Data Recorder 
EL/MEMS Data Recorder 
256 Pneumatic Indicator
Transient Protection Module

Informasi Produk :

Yudhistira

Hp. 0811 188 6845

Email : naysite2@gmail.com; 

Hammer Test untuk Pengujian pada Beton 58-C0181/C

Keterangan

Alat Uji "hammer test"

Merek : Controls – Italia

Standard : EN 12504-2 | ASTM C805

Kode Barang : 58 - C0181/C 

Deskripsi Umum :

Beton terdiri dari beragam rasio pencampuran antara air, semen, pasir, aggregate, serta faktor pencampuran dan lainnya, hal ini tentu menentukan kualitas beton itu sendiri, jadi mutlak bagi produsen beton untuk mengetahui kualitas beton yang ingin dibuat, kualitas beton biasanya dinyatakan dalam satuan “K mis. K-250(yang menyatakan 250kg/cm2)” atau “Fc’

Setelah merencanakan kualitas beton yang diinginkan maupun dipesan(sebagai owner, main kontraktor) maka pembuktian pun harus dilakukan agar Beton yang dibuat sesuai dengan yang diinginkan/dipesan.

Pembuktian kualitas beton(dalam hal kekuatannya) dapat dilakukan dengan 2 cara yang sangat populer yaitu dengan uji tekan beton menggunakan Mesin Uji Tekan Beton atau dengan  Hammer Test. Namun pada halaman ini hanya membahas tentang ‘Hammer Test’

Hammer test yaitu suatu alat pemeriksaan mutu beton tanpa merusak beton, metode ini akan diperoleh cukup banyak data dalam waktu yang relatif singkat dengan biaya yang murah.

Alat yang kami siapkan bermerk “Controls” karena kami adalah agen resmi untuk merk tersebut.

1 Set Hammer test sudah termasuk spare part untuk per besar dan kecil(dapat berubah – ubah sewaktu tanpa pemberitahuan)..

Dan sebagai agen resmi dari merk Controls maka tersedia teknisi berpengalaman(yang rutin dilatih dipabrik langsung) untuk melakukan service/perbaikan dan penggantian spare part.

Spesifikasi :

• Impact energy: 2.207 Nm
• Measurement range: 10 to 70 N/mm2
• Aluminium case, complete with carrrying case, grinding stone and instruction manual
• Case dimension: 190x100x350 mm
• Weight approx.: 1.5 kg

Ordering Info :

58-C0181/C 

Concrete test hammer type N. Aluminium body. Supplied with hard plastic carrying case. 
Conforming to EN 12504-2 and ASTM C805  

58-C0181/C1

Concrete test hammer type N. Aluminium body, supplied complete with traceable calibration certificate and carrying case.
Conforming to EN 12504-2 and ASTM C805 

 

Price : Call For Info

Yudhistira

Informasi Produk :

Yudhistira

Hp. 0811 188 6845

Email : naysite2@gmail.com; 

AUTOMAX PRO-M | EN Automatic Compression Tester for Cubes and Cylinders

Mesin Uji Kuat Tekan Beton Otomatis Dengan Fitur Uji Modulus Elastisitas

Merek/Supplied From : Controls – Italy

Model : 50-C46F02/M, 50-C56F02/M, 50-C68F02/M, 50-C78F02/M

Kapasitas : 2000kN, 3000kN, 4000kN, 5000kN

Standard : EN 12390-13, EN 12390-4

 

Highlights:

Sistem Kontrol Daya AUTOMAX PRO-M dilengkapi dengan hidraulik yang unggul. Selain pengujian kegagalan standar, sistem ini dapat melakukan pengujian Penentuan Modulus Elastisitas, Karakterisasi Beton Bertulang Serat (FRC) di bawah kendali perpindahan, dan pengujian tarik pada spesimen baja.

 

Spesfications:

Hydraulics

• ·        DC motor, 720W, 50-60Hz
• ·        Maximum working pressure 700 bar
• ·        Load/unload electro-valve for test execution via display/PC and automatic stop at specimen failure
• ·        Active control of up to 4 frames by selection via display/PC (third and fourth frame as option). See accessories.
• ·        ES Energy Saving technology to reduce the power consumption and enable silent operation
• ·        Flow-sharing technology to perform loading and unloading cycles at controlled rate

 

Hardware

• 524,000 points high-resolution/stability analog channels
• 6 channels to be factory configured:
• 2 channels for load sensors
• 2 channels for load or displacement/strain sensor
• 2 channels for displacement/strain sensors
• Control frequency 250 Hz
• Sampling frequency 250 Hz
• 7”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
• Unlimited storage capacity for test data on internal 16 GB SD card
• USB port for test data storage on external USB memory stick and for firmware upgrade
• Ethernet port for PC / Internet /network communication
• Optional integrated graphic printer including Load-Time plot (for standard failure tests)
• RS 232 port for data downloading in ASCII format

 

Model :

 

50-C46F02/M AUTOMAX PRO-M COMPACT-Line automatic compression machine, 2000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 200mm. Suitable for ElasticModulus and Poisson ratio determination.

 

50-C56F02/M AUTOMAX PRO-M COMPACT-Line automatic compression machine, 3000 kN cap. for cylinders up to 160 x 320 mm and cubes up to 200mm. Suitable for ElasticModulus and Poisson ratio determination.

50-C68F02/M AUTOMAX PRO-M COMPACT-Line automatic compression machine, 4000 kN cap. for cylinders up to 250 x 500 mm and cubes up to 300mm. Suitable for Elastic Modulus and Poisson ratio determination.

 

50-C78F02/M AUTOMAX PRO-M COMPACT-Line automatic compression machine, 5000 kN cap. for cylinders up to 250 x 500 mm and cubes up to 300mm. Suitable for Elastic Modulus and Poisson ratio determination.

 

Price/Info: Yudhistira, ST

Hp/WA : 0818 0816 0634; 0811 188 6845

Email : naysite2@gmail.com

 

 

PILOT PRO | GENERAL UTILITY Automatic Compression Testers for Cubes and Cylinders

Merek/Supplied From : Controls – Italia

Model : 50-C13P02, 50-C43P02, 50-C34P02

Kapasitas : 1500kN, 2000kN, dan 3000kN

Fitur Utama :

• Menggunakan 4 Kolom sangat kaku dengan Las yang sudah teruji kekakuan, kestabilan serta kekuatannya.
• Dudukan sampel/spherical seat yang sangat tangguh
• Dengan fitur eksekusi pengujian yang otomatis yang sesuai dengan standard yang berlaku.
• Dengan kemampuan pengendalian ganda melalui layar baca atau PC
• Tinggat akurasi kelas 1 (EN) dan Kelas A (ASTM) yang dimulai dari 10% dari skala kemampuan mesin(memungkinkan 1% dengan pesanan tambahan)
• Dapat dipadukan dengan software yang intuitive dari DATA MANAGER
• Penggunaan daya yang rendah dan hening saat beroperasi yang berasal dari teknologi "ES Energy Saving Technologies"
• Tingkatan pompa hidraulik ganda dengan pendekatan yang cepat untuk menambah produktivitas dari aktivitas pengujian yang dapat mencapai 40/Jam
• Menggunakan Piringan kontak yang lembut dan mulus saat mulai pengujian.
• Terdapat pilihan untuk disambung dengan frame ke 2 atau ke 3.
• Dengan pilihan pirnter internal yang memuat  grafik beban-waktu.
• Remote verification of settings and performances for malfunctions debugging
• Storage of up to 10 test profiles for each channel for quick start

 

Specifications :

Hydraulics

• Dual-stage pump: centrifugal low pressure for fast approach automatically switches to radial multi-piston high pressure for loading
• DC motor, 720W, 50-60Hz
• Maximum working pressure 700 bar
• Load/unload valve
• Second/third frame selection valve available as option

 

Hardware

• 524,000 points high-resolution/stability analog channels
• 3 channels for load sensors
• Control frequency 250 Hz
• Sampling frequency 250 Hz
• 5.1”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
• Unlimited storage capacity for test data on internal 16 GB SD card
• USB port for test data storage on external USB memory stick and for firmware upgrade
• Ethernet port for PC / Internet /network communication
• Optional integrated graphic printer including Load-Time plot
• RS 232 port for data downloading in ASCII format

 

Price/Info: Yudhistira, ST

Hp/WA : 0818 0816 0634; 0811 188 6845

Email : naysite2@gmail.com

Wizard Auto, Mesin Uji tekan Beton - Otomatis untuk sampel silinder dan kubus

Kapasitas : 1500kN – 3000kN

Merek/Supplied From : Controls – Italy

Model : C34W02 - Wizard Auto

 

General Descriptions :

WIZARD AUTO is CONTROLS new standard automatic Quality Control machine for compression and flexural testing and includes many new features and enhancements to improve the user-friendliness, efficiency, operator comfort and energy savings.

QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.

Wizard Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.

Mainly dedicated to routine failure tests (compression, flexure and indirect tensile), WIZARD AUTO is the perfect solution to ensure total certainty of testing accuracy and strict conformity to international Standards. In fact being an automatic system it allows:

 

• Reduced opportunities for operator errors, improving accuracy of results and repeatability
• Easy-to-use: even for operators with limited expertise.
• Conforming to Standards: the machine automatically performs the test at correct test speed. Conformance to Standards can be easily proven.
• High performance: high speed pump closes the daylight above the specimen at the fasted speed allowing a very high throughput of tests.
• Operator comfort due to the significant noise reduction.
• Energy saving, with 50% reduction in energy consumption.

 

Main features include:

• Rigid welded steel construction
• Accuracy Class 1/A (EN/ASTM) starting from 10% of full scale (from 1% on request)
• Two channels for load sensors
• Wide graphic display 128 x 80 pixel
• Graphic printer available as option
• AC motor fitted with VFD INVERTER device: high efficiency, low consumption, silent operation
• Dual stage pump for fast approach and automatic switch to high pressure for loading
• Second frame optional facility

 

Frame 
Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen.

Compression platens 
See table. Traceable certificate of surface hardness available on request.

Safety features 
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front and rear flexible transparent fragment guard.

 

Technical specifications :

WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulic

• Max pressure 700 bar
• Power 750 W
• Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low delivery for loading.
• AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
• Second frame optional facility using valve selector.

Hardware

• Two 16 bit analog channels for load sensors
• Wide graphic display 128 x 80 pixel
• Sampling rate 50 Hz
• Internal memory
• RS 232 port for data download (including load/time graph points) to PC in ASCII format
• Integrated printer as optional. See accessories

Firmware

• Real time display of load and stress
• Automatic application of the selected load rate
• Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
• Peak detection and saving
• Language selection
• Multi-coefficient linearization of the calibration curve for better accuracy at low loads
• Multiple units: Lbf / Ton / kN.

 

Informasi Produk :

Yudhistira, ST

Hp. 0811 188 6845; 0818 0816 0634

Email : naysite2@gmail.com; 

List Peralatan Laboratorium Teknik Sipil yang kami sediakan

Drying Samples
- Laboratory Ovens
- Hot Plate
- Air Dryer
- Microwave oven
- Melting pot
- Climatic chambers
- Muffle furnaces

Weighing Samples
- Electronic analytical balances
- Electronic top loading balances
- Battery operated balances
- Standard calibration masses
- Specific gravity

Sample grading
- Sieves
- Sieve shakers
- Wet washing sieves
- Bar sieves
- Riffle boxes and sample splitters

Field classification, sampling, and preparation
- Soil sampling - Augers and samplers
- Water level indicators
- Pocket penetrometers and vane testers
- Field inspection kit
- Dynamic penetrometers
- Extruders
- Soil lathe and trimmers
- Sample mixers and soil cutter

Moisture content
- Moisture determination balance
- Desiccators
- Universal carbide meters
- Speedy moisture testers

Laboratory Classification
- Specific gravity
- Liquid, Plastic and shrinkage limits
- Sedimentation / Hydrometer and pipette methods

Chemical Tests
- pH Papers and meters
- Chloride and Sulphate content determination
- pH Meters
- Water test kits
- Soil colour charts

Soil Mechanics 
Consolidation systems
- Front loading oedometers
- Continuous consolidation apparatus
- Hydraulic consolidation

Residual shear strength apparatus
- Shear testing machines
- Large digital shear box
- Laboratory vane apparatus
- Torsional shear apparatus

Triaxial tests/permeability
- Triaxial tests
- Triaxial load frames and accessories
- Triaxial cells and accessories
- On sample measurement transducers
- Pressure systems and related apparatus
- Water de-airing system
- Volume change measurement and air compressors
- Pore water pressure measurement
- Specimen consolidation
- Permeability cells for normal and contaminated soil samples
- Determination of permeability in triaxial cells
- Unsaturared testing

Effective stress/stress path automatic triaxial testing
- Automatic Triaxial System
- Automatic Data Acquisition and Processing
- Automatic Triaxial Configurations
- Transducers

Acquisition system for soil mechanics
- Geodatalog (with DATACOMM software)
- Geo-Analysis templates
- Electonic transducers
Advanced soils testing
- Cyclic/Stress path triaxial system
- Cyclic simple shear

Compacted road base and subbase soils
Unbound and hydraulically bound mixtures
- Proctor rammers and moulds
- Automatic compactors
- Vibration compaction hammer
- Relative density test set
- Moisture condition Value (MCV)
- Compaction penetrometer

CBR-(IBI)*Immediate Bearig Index
- CBR equipment
- Loading presses
- Multispeed tester
- Field CBR apparatus
- Accessories to perform Uniaxial and Unconfined compression tests
- Impact soil tester
- Determination of strength of stabilised soil
Field and laboratory density / bearing capacity
- Sand replacement method
- Balloon method
- Surface soil sampler (core cutter) method
- Field density of undisturbed soil
- Plate load testing
- Measurement of a rolling load deflection by the modified Benkelman beam
- Dynamic deformation module of soils

Permeability
- Constant and falling head apparatus
- Determination of dispersibility
- Compaction permeameters and stands

Rock Testing
Rock mechanics
- Rock sampling and sample preparation
- Strength and deformability tests
- Automatic tests systems
- Elastic modulus and strength characteristics of rock specimens in uniaxial and triaxial conditions
- Hoek cells for triaxial tests
- Semi-automatic test systems
- Classification tests
- Splitting tensile test
- Slake durability index
- Permeability of rock
- Behaviour of joints
- Measurement of shear strength
- Roughness measurement.Profilometers
- Tilt test
- Strength index (point load)
- Rock classification hammer

Aggregate
- Riffle boxes (sample splitters)
- Sieving method.Test sieves, nominal size of apertures
- Determination of particle shape
- Flakiness and elongation index
- Shape index
- Assessment of fines.Sand equivalent test
- Assessment of fines.Methylene blue test
- Determination of clay, silt, and dust
- Determination of the efflux index

- Resistance to fragmentation (Los Angeles)
- Crushing resistance of lightweight aggregate
- Abrasion resistance of natural stones
- Resistance to wear (Micro-Deval)
- Aggregate crushing value
- Deval apparatus
- Scratch hardness ASTM method
- Aggregate impact value
- Determination of the voids of dry compacted filler
- Aggregate density by water displacement.BS method
- Determination of loose bulk density and voids
- Determination of the particle density
- Determination of particle density and water absorption
- Determination of Abrasion Value (AAV)
- Surface moisture of fine aggregate.ASTM method
- Moisture measurement
- Determination of the Polished Stone Value
- Skid resistance and friction tester
- Determination of resistance to freezing and thawing - Climatic Chambers
- Magnesium sulphate test
- Determination of drying shrinkage
- Determination of resistance to thermal shock
- Chloride content BS 812
- Organic impurities in fine aggregates
- Carbonate content of aggregates
- Potential reactivity of aggregates
- Sample reduction.Laboratory crushers

Concrete
- Compression and flexural testing machines
- Automatic testing systems

Fresh concrete testing
- Workability and consistency
- Slump test
- Flow table test
- SCC Self compacting concrete test
- Degree of compactability
- Vebé test
- Kelly ball method
- K-Slump method
- Gyratory compactor for NO Slump concrete
- Analysis of freshly mixed concrete
- Water testing
- Density of fresh concrete
- Unit weight measures
- Air content of fresh concrete
- Setting time by penetration

Hardened concrete testing 
- Concrete mixers
- Cube cylinder and beam moulds (metal)
- Plastic cube and cylinder moulds
- Concrete compaction : Vibrating tables; Poker vibrators
- Curing tanks
- Moist curing rooms, test set
- Accelerated concrete curing
- Specimen grinding
- Specimen cutting
- Cylinder capping equipment
- Density of hardrned concrete
- Surface water absorption
- Depth of penetration of water under pressure
- Hydraulic shrinkage determination
- Expansion of mortar and concrete

NDT / Protection and repair of concrete structures
- NDT testing
- Concrete durability evaluation :
- Chloride ion penetration
- Half cell potential test
- Cover measurement
- Metal location in concrete
- Carbonation test
- Chloride content
- Resistivity test
- Surface dampness
- Permeability of concrete to oxygen
- Water penetration
- Water and gas permeability
- Flexural, longitudinal, torsional resonance
- Concrete hammers
- Pull-off strength
- Pullout force
- Microcore method
- Ultrasonic pulse velocity testers
- Ultrasonic and rebound measorement
- Ultrasonic crosshole test system

In-situ evaluation of stress, structural inspection
- Crack width monitoring gauges
- Length changes
- Crack measurement microscope
- Flat jacks
- Deflectometers
- Digital instrumentation for testing structures

Cement
Physical and chemical properties of cement
- Cement samplers
- Specific gravity (Relative density)
- Hydraulic shrinkage
- Soundness of cement and hydrated lime
- Carbon dioxide content
- Expansion of Portland cement
- Air content of mortar
- Pat test for soundness of hydrated lime and gypsum plasters
- Fineness of cement
- Bulk density and water retention of cement
- Cement water retention
- Heat of hydration of cement
- Loss on ignition

Setting time and consistency of cement
- Setting time and consistency of cement – Vicat method
- Automatic Vicat apparatus
- Standard Vicat apparatus
- Setting time of cement. Gillmore method
- Flow of mortars
- Workable life of mortors

Building lime, grout and mud testing
- Consistency, air content and water retention
- Flow, Reactivity, Bulk density of building lime
- Bulk density of lime
- Yield of lime
- Flow properties of grouts, muds and other fluid materials
- Fly ash determ., consistency and swelling ratio
- Sand content of drilling muds
- Water permeability
- Determination of fineness by wet sieving
- Carbon dioxide determ., Filtration behaviour, soundness
- Filtration behaviour of drilling fluid

Determination of cement strength
- Mortar mixers
- Jolting apparatus
- Preparation of 40x40x160 mm cement prisms
- Preparation of 50 and 70.7 mm mortar cubes
- Curing of specimens
- General purpose water curing bath with cooler unit
- Compression and flexural testers
- Automatic testing systems
- Load frames (Compression testing Machine for Cement)

Steel and Miscellaneous
Universal testers. Steel mechanical testing
- Multiensayo electromechanical testers
- Tension and compression tester for field and laboratory 500/1000 kN cap
- Computer controlled universal testing machines
- Electronic coaxial and standard extensometers
- Cold test bending
- Uniframe universal compression testers
- Testing machines for flat specimens and tiles

Asphalt
Analysis of bituminous mixtures
- Soluble binder content, Hot and cold extraction methods
- Separation of mineral matter, Centrifuge extractors
- Automatic binder extraction
- Asphalt binder analysis - Ignition method
- Bitumen recovery
- Determination of the maximum density
- Determination of the affinity aggregate/bitumen
- Binder drainage from porous asphalt
- Asphalt temperature measurement
- Solvent recovery

Design and testing of bituminous mixtures
- Marshall stability (ASTM-AASHTO methods)
- Automatic compactors
- Marshall stability (EN method)
- Gyratory compactors
- ILS Internal angle measurement apparatus
- Vibratory compactor
- Water sensitivity, indirect tensile strength, Marshall test
- Tensile splitting devices
- Marshall tester (EN)
- Laboratory mixers
- Bitumix, automatic laboratory mixer
- Water baths

Rheologic properties of bituminous mixtures
- Static and dynamic systems
- IMACS, Integrated Multi Axis System
- Servo-Pneumatic testing systems
- Servo-hydraulic testing systems
- Test modules and accessories
- Environmental chambers
- Triaxial test on Unbound materials
- Buyers guide
- Stand alone Beam Fatigue Apparatus
- Test software for dynamic asphalt testing systems
- SPT, Simple Performance Tester
- Dyna-Comp, pneumatic roller compactor
- Dyna-Track, wheel tracking apparatus
- Tensile splitting device (CNR)
- Duriez

Asphalt and road quality testing
- Indentation Penetrometer
- Particle loss (Los Angeles)
- Sampling by coring (Pavement core drilling machine)
- Tests on slurry seal mixtures
- Rate of spread apparatus
- Vialit plate
- Electromagnetic asphalt density meter
- Skid resistance tester
- MOT straightedge
- Sand patch apparatus
- Travelling beam device
- Benkelman beam apparatus
- Bulk density by specific gravity frame
- Permeameters

Testing bitumen and bituminous binders
- Sampling bitumen and oil
- Penetration of bituminous materials
- Softening point: ring and ball method
- Water in bitumen
- Residue on sieving
- Degree of solubility
- Particle charge of cationic emulsified asphalt
- Emulsified asphalts-residue
- Breaking point.Fraas method
- Kinematic and dynamic viscosity
- Rolling thin-film oven
- Thin film oven
- Rotary evaporation apparatus
- Standard TAR/BRTA viscometers
- Engler viscometer
- Saybolt viscometers
- Settling and penetration power of bitumen emulsions
- Breaking value of cationic bitumen emulsions
- Flash point by tag open and closed cup tester
- Hubbard-Carmick pycnometers
- Storage stability of asphalt emulsions
- Wilhelmi softening point
- Ductility
- Distillation of cut-back asphalt
- Pressure Ageing Vessel (PAV)

General 
Measuring instruments
- Verification of force transfer
- Strain gauged column
- Digital instrumentation
- High capacity strain gauge load cells
- Serial printers
- Low capacity strain gauge load cells
- Strain gauges
- Linear potentiometric transducers
- Pressure transducers
- Electronic instrumentation. Data Logger
- Load measuring rings
- Assessment of flatness, perpendicularity and straightness of test specimens and moulds
- Dial indicators
- Digital dial indicators
- Digital thermometers
- Digital timers
- Humidity and temperature measurement
- Mechanical watches and stop clocks
- Speed measurements

Core drilling equipment
- Portable universal core drilling machines
- Heavy-duty universal coring machines
- Coring bits and accessories
- Pavement coring machine

Info :

Yudhistira

Hp. 0811 188 6845

Email : naysite2@gmail.com; 

atau di :

http://geotechdept.indonetwork.co.id/profile/pt-new-module-international.htm